3-16 tubing applications specially designed for environmental sealing and electrical insulation of wire splices, terminations, and components where see-through inspection is required. operating temperature range -40c to 130c features and benefits 4:1 shrink ratio allows a few sizes to cover a wide range of splice and component diameters. mechanically tough tubing provides strain relief and abrasion protection of wire splices, terminals and other components. thick adhesive liner forms an effective barrier against fluids and moisture and performs well at an extended temperature range. installation minimum shrink temperature: 110c minimum full recovery temperature: 135c ES1000 clear, high-shrink-ratio, adhesive-lined, semirigid polyolefin tubing specifications/approvals series ul raychem ES1000 e85381 rt-1113 600 v, 125c ? available in: americas europe asia pacific 3-tubing 30/9/02 10:33 am page 16
fax-on-demand fax id description us only (800) 260-9099 2550 data sheet outside us (650) 257-2301 2551 rt-1113 visit our website at www.tycoelectronics.com users should independently evaluate the suitability of the product for their application. before ordering check with factory for most current data. tubing 3-17 *wall thickness will be less if tubing recovery is restricted during shrinkage. product dimensions ( mm /in) inside diameter (including core) recovered wall thickness* minimum maximum minimum minimum minimum expanded recovered total wall jacket wall adhesive wall part number as supplied after heating after heating after heating after heating ES1000-no.1 5.72 (0.225) 1.27 (0.050) 1.20 (0.047) 0.64 (0.025) 0.56 (0.022) ES1000-no.2 7.44 (0.293) 1.65 (0.065) 1.52 (0.060) 0.76 (0.030) 0.76 (0.030) ES1000-no.3 10.85 (0.427) 2.41 (0.095) 1.91 (0.075) 0.89 (0.035) 1.02 (0.040) ES1000-no.4 17.78 (0.700) 4.45 (0.175) 2.41 (0.095) 1.04 (0.041) 1.37 (0.054) ordering information color standard clear (-x) size selection always order the largest size that will shrink snugly over the component to be covered. standard packaging cut pieces. marking tubing will be printed with its numbered size (such as es-1, es-2, es-3, or es-4). ordering description specify product name, numbered size, color, and cut length (for example, ES1000-no. 2-x-50mm). 3-tubing 30/9/02 10:33 am page 17
|